imapd.conf

IMAP configuration file

DESCRIPTION

/etc/imapd.conf is the configuration file for the Cyrus IMAP server. It defines local parameters for IMAP.

Each line of the /etc/imapd.conf file has the form

option: value

where option is the name of the configuration option being set and value is the value that the configuration option is being set to.

Although there is no limit to the length of a line, a ``\’’ (backslash) character may be used as the last character on a line to force it to continue on the next one. No additional whitespace is inserted before or after the ``\’’. Note that a line that is split using ``\’’ character(s) is still considered a single line.

For example

option:\

value1 value2 \

value3

is equivalent to

option: value1 value2 value3

Blank lines and lines beginning with ``#’’ are ignored.

For boolean and enumerated options, the values ``yes’’, ``on’’, ``t’’, ``true’’ and ``1’’ turn the option on, the values ``no’’, ``off’’, ``f’’, ``false’’ and ``0’’ turn the option off.

FIELD DESCRIPTIONS

The sections below detail options that can be placed in the /etc/imapd.conf file, and show each option’s default value. Some options have no default value, these are listed with ``<no default>’’. Some options default to the empty string, these are listed with ``<none>’’.

addressbookprefix: #addressbooks

The prefix for the addressbook mailboxes hierarchies. The hierarchy delimiter will be automatically appended. The public addressbook hierarchy will be at the toplevel of the shared namespace. A user’s personal addressbook hierarchy will be a child of their Inbox.

admins: <empty string>

The list of userids with administrative rights. Separate each userid with a space. Sites using Kerberos authentication may use separate “admin” instances.

Note that accounts used by users should not be administrators. Administrative accounts should not receive mail. That is, if user “jbRo” is a user reading mail, he should not also be in the admins line. Some problems may occur otherwise, most notably the ability of administrators to create top-level mailboxes visible to users, but not writable by users.

afspts_localrealms: <none>

The list of realms which are to be treated as local, and thus stripped during identifier canonicalization (for the AFSPTS ptloader module). This is different from loginrealms in that it occurs later in the authorization process (as the user id is canonified for PTS lookup)

afspts_mycell: <none>

Cell to use for AFS PTS lookups. Defaults to the local cell.

allowallsubscribe: 0

Allow subscription to nonexistent mailboxes. This option is typically used on backend servers in a Murder so that users can subscribe to mailboxes that don’t reside on their “home” server. This option can also be used as a workaround for IMAP clients which don’t play well with nonexistent or unselectable mailboxes (e.g., Microsoft Outlook).

allowanonymouslogin: 0

Permit logins by the user “anonymous” using any password. Also allows use of the SASL ANONYMOUS mechanism.

allowapop: 1

Allow use of the POP3 APOP authentication command.

Note that this command requires that SASL is compiled with APOP support, that the plaintext passwords are available in a SASL auxprop backend (e.g., sasldb), and that the system can provide enough entropy (e.g., from /dev/urandom) to create a challenge in the banner.

allownewnews: 0

Allow use of the NNTP NEWNEWS command.

Note that this is a very expensive command and should only be enabled when absolutely necessary.

allowplaintext: 0

If enabled, allows the use of cleartext passwords on the wire.

By default, the use of cleartext passwords requires a TLS/SSL encryption layer to be negotiated prior to any cleartext authentication mechanisms being advertised or allowed. To require a TLS/SSL encryption layer to be negotiated prior to ANY authentication, see the tls_required option.

allowusermoves: 0

Allow moving user accounts (with associated meta-data) via RENAME or XFER.

Note that measures should be taken to make sure that the user being moved is not logged in, and cannot login during the move. Failure to do so may result in the user’s meta-data (seen state, subscriptions, etc) being corrupted or out of date.

altnamespace: 1

Use the alternate IMAP namespace, where personal folders reside at the same level in the hierarchy as INBOX.

This option ONLY applies where interaction takes place with the client/user. Currently this is limited to the IMAP protocol (imapd) and Sieve scripts (lmtpd). This option does NOT apply to admin tools such as cyradm (admins ONLY), reconstruct, quota, etc., NOR does it affect LMTP delivery of messages directly to mailboxes via plus-addressing. The default changed in 3.0 from off to on.

altprefix: Alt Folders

Alternative INBOX spellings that can’t be accessed in altnamespace otherwise go under here

annotation_db: twoskip

The cyrusdb backend to use for mailbox annotations.

Allowed values: skiplist, twoskip, lmdb

annotation_db_path: <none>

The absolute path to the annotations db file. If not specified, will be configdirectory/annotations.db

anyoneuseracl: 1

Should non-admin users be allowed to set ACLs for the ‘anyone’ user on their mailboxes? In a large organization this can cause support problems, but it’s enabled by default.

annotation_allow_undefined: 0

Allow clients to store values for entries which are not defined either by Cyrus or in the annotations_definitions file.

annotation_definitions: <none>

File containing external (third-party) annotation definitions.

Each line of the file specifies the properties of an annotation and has the following form:

name, scope, attrib-type, proxy-type, attrib-names, acl

name

is the hierarchical name as in RFC 5257 or RFC 5464 (in the latter case, without the leading /shared or /private). For example, /vendor/acme/blurdybloop.

scope

specifies whether the annotation is for the server, a mailbox, or a message.

attrib-type

specifies the attribute data type, which is used only to check the string value passed by clients when setting annotations. The attrib-type is one of:

string

any value is accepted.

content-type

this obsolete data type, which was useful for early drafts of the standard, is accepted but silently translated to string.

boolean

only the strings “true” or “false” are accepted. Checking is case-insensitive but the value is forced to lowercase.

int

integers are accepted.

uint

non-negative integers are accepted.

proxy-type

specifies whether this attribute is for the backend or proxy servers or both (proxy_and_backend)

attrib-names

is the space-separated list of available attributes for the annotation. Possible attribute names are value.shared, value.priv, and value (which permits both value.priv and value.shared). The attribute names size, size.shared, and size.priv are accepted but ignored; these attributes are automatically provided by the server if the corresponding value attribute is specified. Some obsolete attributes, which were defined early drafts of the standard, are accepted and ignored with a warning.

extra-permissions

is the extra ACL permission bits required for setting this annotation, in standard IMAP ACL permission bit string format. Note that this is in addition to the permission bits specified in RFC 5257 and RFC 5464, so leaving this field empty is harmless. Note also that there is no way to specify that an annotation can only be set by an admin user; in particular the a permission bit does not achieve this.

Blank lines and lines beginning with ``#’’ are ignored.

annotation_callout: <none>

The pathname of a callout to be used to automatically add annotations or flags to a message when it is appended to a mailbox. The path can be either an executable (including a script), or a UNIX domain socket.

aps_topic: <none>

Topic for Apple Push Service registration.

aps_topic_caldav: <none>

Topic for Apple Push Service registration for CalDAV.

aps_topic_carddav: <none>

Topic for Apple Push Service registration for CardDAV.

archive_enabled: 0

Is archiving enabled for this server. You also need to have an archivepartition for the mailbox. Archiving allows older email to be stored on slower, cheaper disks - even within the same mailbox, as distinct from partitions.

archive_days: 7

The number of days after which to move messages to the archive partition if archiving is enabled

archive_maxsize: 1024

The size in kilobytes of the largest message that won’t be archived immediately. Default is 1Mb

archive_keepflagged: 0

If set, messages with the \Flagged system flag won’t be archived, provided they are smaller than archive_maxsize.

archivepartition-name: <none>

The pathname of the archive partition name, corresponding to spool partition partition-name. For any mailbox residing in a directory on partition-name, the archived messages will be stored in a corresponding directory on archivepartition-name. Note that not every partition-name option is strictly required to have a corresponding archivepartition-name option, but that without one there’s no benefit to enabling archiving.

auditlog: 0

Should cyrus output log entries for every action taken on a message file or mailboxes list entry? It’s noisy so disabled by default, but can be very useful for tracking down what happened if things look strange

auth_mech: unix

The authorization mechanism to use.

Allowed values: unix, pts, krb, krb5

autocreateinboxfolders: <none>

Deprecated in favor of autocreate_inbox_folders.

autocreatequota: 0

Deprecated in favor of autocreate_quota.

autocreatequotamsg: -1

Deprecated in favor of autocreate_quota_messages.

autosievefolders: <none>

Deprecated in favor of autocreate_sieve_folders.

generate_compiled_sieve_script: 0

Deprecated in favor of autocreate_sieve_script_compile.

autocreate_sieve_compiled_script: <none>

Deprecated in favor of autocreate_sieve_script_compiled.

autosubscribeinboxfolders: <none>

Deprecated in favor of autocreate_subscribe_folders.

autosubscribesharedfolders: <none>

Deprecated in favor of autocreate_subscribe_sharedfolders.

autosubscribe_all_sharedfolders: 0

Deprecated in favor of autocreate_subscribe_sharedfolders_all.

autocreate_inbox_folders: <none>

If a user does not have an INBOX already, and the INBOX is to be created, create the list of folders in this setting as well. autocreate_inbox_folders is a list of INBOX’s subfolders separated by a “|”, that are automatically created by the server under the following two scenarios. Leading and trailing whitespace is stripped, so “Junk | Trash” results in two folders: “Junk” and “Trash”. See also the xlist-flag option, for setting special-use flags on autocreated folders.

INBOX folders are created under both the following conditions:

  1. The user logins via the IMAP or the POP3 protocol. autocreate_quota option must have a value of zero or greater.

  2. A message arrives for the user through the lmtpd(8). autocreate_post option must be enabled.

autocreate_post: 0

If enabled, when lmtpd(8) receives an incoming mail for an INBOX that does not exist, then the INBOX is automatically created by lmtpd(8) and delivery of the message continues.

autocreate_quota: -1

If set to a value of zero or higher, users have their INBOX folders created upon a successful login event or upon lmtpd(8) message delivery if autocreate_post is enabled, provided their INBOX did not yet already exist.

The user’s quota is set to the value if it is greater than zero, otherwise the user has unlimited quota.

Note that quota is specified in kilobytes.

autocreate_quota_messages: -1

If set to a value of zero or higher, users who have their INBOX folders created upon a successful login event (see autocreate_quota), or upon lmtpd(8) message delivery if autocreate_post is enabled, receive the message quota configured in this option.

The default of -1 disables assigning message quota.

For consistency with autocreate_quota, a value of zero is treated as unlimited message quota, rather than a message quota of zero.

autocreate_sieve_folders: <none>

A “|” separated list of subfolders of INBOX that will be automatically created, if requested by a sieve filter, through the “fileinto” action. The default is to create no folders automatically.

Leading and trailing whitespace is stripped from each folder, so a setting of “Junk | Trash” will create two folders: “Junk” and “Trash”.

autocreate_sieve_script: <none>

The full path of a file that contains a sieve script. This script automatically becomes a user’s initial default sieve filter script.

When this option is not defined, no default sieve filter is created. The file must be readable by the Cyrus daemon.

autocreate_sieve_script_compile: 0

If set to yes and no compiled sieve script file exists, the sieve script which is compiled on the fly will be saved in the file name that autocreate_sieve_compiledscript option points to. In order a compiled script to be generated, autocreate_sieve_script and autocreate_sieve_compiledscript must have valid values

autocreate_sieve_script_compiled: <none>

The full path of a file that contains a compiled in bytecode sieve script. This script automatically becomes a user’s initial default sieve filter script. If this option is not specified, or the filename doesn’t exist then the script defined by autocreate_sieve_script is compiled on the fly and installed as the user’s default sieve script

autocreate_subscribe_folders: <none>

A list of folder names, separated by “|”, that the users get automatically subscribed to, when their INBOX is created. These folder names must have been included in the autocreateinboxfolders option of the imapd.conf.

autocreate_subscribe_sharedfolders: <none>

A list of shared folders (bulletin boards), separated by “|”, that the users get automatically subscribed to, after their INBOX is created. The shared folder must have been created and the user must have the required permissions to get subscribed to it. Otherwise, subscribing to the shared folder fails.

autocreate_subscribe_sharedfolders_all: 0

If set to yes, the user is automatically subscribed to all shared folders, one has permission to subscribe to.

autocreate_users: anyone

A space separated list of users and/or groups that are allowed their INBOX to be automatically created.

backuppartition-name: <none>

The pathname of the backup partition name. At least one backup partition pathname MUST be specified if backups are in use. Note that there is no relationship between spool partitions and backup partitions.

backup_compact_minsize: 0

The minimum size in kilobytes of chunks in each backup. The compact tool will try to combine adjacent chunks that are smaller than this.

Setting this value to zero or negative disables combining of chunks.

backup_compact_maxsize: 0

The maximum size in kilobytes of chunks in each backup. The compact tool will try to split chunks larger than this into smaller chunks.

Setting this value to zero or negative disables splitting of chunks.

backup_compact_work_threshold: 1

The number of chunks that must obviously need compaction before the compact tool will go ahead with the compaction. If set to less than one, the value is treated as being one.

backup_staging_path: <none>

The absolute path of the backup staging area. If not specified, will be temp_path/backup

backup_retention_days: 7

The number of days to keep content in backup after it has been deleted from the source. If set to a negative value or zero, deleted content will be kept indefinitely.

backup_db: twoskip

The cyrusdb backend to use for the backup locations database.

Allowed values: skiplist, sql, twoskip, lmdb

backup_db_path: <none>

The absolute path to the backup db file. If not specified, will be configdirectory/backups.db

backup_keep_previous: 0

Whether the ctl_backups compact and ctl_backups reindex commands should preserve the original file. The original file will be named with a timestamped suffix. This is mostly useful for debugging.

Note that with this enabled, compacting a backup will actually increase the disk used by it (because there will now be an extra copy: the original version, and the compacted version).

boundary_limit: 1000

messages are parsed recursively and a deep enough MIME structure can cause a stack overflow. Do not parse deeper than this many layers of MIME structure. The default of 1000 is much higher than any sane message should have.

caldav_allowattach: 1

Enable managed attachments support on the caldav server.

caldav_allowscheduling: on

Enable calendar scheduling operations. If set to “apple”, the server will emulate Apple CalendarServer behavior as closely as possible. Allowed values: off, on, apple

caldav_create_attach: 1

Create the ‘Attachments’ calendar if it doesn’t already exist

caldav_create_default: 1

Create the ‘Default’ calendar if it doesn’t already exist

caldav_create_sched: 1

Create the ‘Inbox’ and ‘Outbox’ calendars if they don’t already exist

caldav_maxdatetime: 20380119T031407Z

The latest date and time accepted by the server (ISO format). This value is also used for expanding non-terminating recurrence rules.

Note that increasing this value will require the DAV databases for calendars to be reconstructed with the dav_reconstruct utility in order to see its effect on serer-side time-based queries.

caldav_mindatetime: 19011213T204552Z

The earliest date and time accepted by the server (ISO format).

caldav_realm: <none>

The realm to present for HTTP authentication of CalDAV resources. If not set (the default), the value of the “servername” option will be used.

calendarprefix: #calendars

The prefix for the calendar mailboxes hierarchies. The hierarchy delimiter will be automatically appended. The public calendar hierarchy will be at the toplevel of the shared namespace. A user’s personal calendar hierarchy will be a child of their Inbox.

calendar_user_address_set: <none>

Space-separated list of domains corresponding to calendar user addresses for which the server is responsible. If not set (the default), the value of the “servername” option will be used.

carddav_realm: <none>

The realm to present for HTTP authentication of CardDAV resources. If not set (the default), the value of the “servername” option will be used.

carddav_repair_vcard: 0

If enabled, VCARDs with invalid content are attempted to be repaired during creation.

chatty: 0

If yes, syslog tags and commands for every IMAP command, mailboxes for every lmtp connection, every POP3 command, etc

client_bind: 0

If enabled, a specific IP will be bound when performing a client connection. client_bind_name is used if it is set, otherwise servername is used. This is useful on multi-homed servers where Cyrus should not use other services’ interfaces.

If not enabled (the default), no bind will be performed. Client connections will use an IP chosen by the operating system.

client_bind_name: <none>

IPv4, IPv6 address or hostname to bind for client connections when client_bind is enabled. If not set (the default), servername will be used.

client_timeout: 10

Number of seconds to wait before returning a timeout failure when performing a client connection (e.g., in a murder environment)

commandmintimer: <none>

Time in seconds. Any imap command that takes longer than this time is logged.

configdirectory: <none>

The pathname of the IMAP configuration directory. This field is required.

createonpost: 0

Deprecated in favor of autocreate_post.

conversations: 0

Enable the XCONVERSATIONS extensions. Extract conversation tracking information from incoming messages and track them in per-user databases.

conversations_counted_flags: <none>

space-separated list of flags for which per-conversation counts will be kept. Note that you need to reconstruct the conversations database with ctl_conversationsdb if you change this option on a running server, or the counts will be wrong.

conversations_db: skiplist

The cyrusdb backend to use for the per-user conversations database.

Allowed values: skiplist, sql, twoskip, lmdb

conversations_expire_days: 90

How long the conversations database keeps the message tracking information needed for receiving new messages in existing conversations, in days.

crossdomains: 0

Enable cross domain sharing. This works best with alt namespace and unix hierarchy separators on, so you get Other Users/foo@example.com/

crossdomains_onlyother: 0

only show the domain for users in other domains than your own (for backwards compatibility if you’re already sharing

cyrus_group: <none>

The name of the group Cyrus services will run as. If not configured, the primary group of cyrus_user will be used. Can be further overridden by setting the $CYRUS_GROUP environment variable.

cyrus_user: <none>

The username to use as the ‘cyrus’ user. If not configured, the compile time default will be used. Can be further overridden by setting the $CYRUS_USER environment variable.

davdriveprefix: #drive

The prefix for the DAV storage mailboxes hierarchies. The hierarchy delimiter will be automatically appended. The public storage hierarchy will be at the toplevel of the shared namespace. A user’s personal storage hierarchy will be a child of their Inbox.

davnotificationsprefix: #notifications

The prefix for the DAV notifications hierarchy. The hierarchy delimiter will be automatically appended. The public notifications hierarchy will be at the toplevel of the shared namespace. A user’s personal notifications hierarchy will be a child of their Inbox.

dav_realm: <none>

The realm to present for HTTP authentication of generic DAV resources (principals). If not set (the default), the value of the “servername” option will be used.

debug_command: <none>

Debug command to be used by processes started with -D option. The string is a C format string that gets 3 options: the first is the name of the executable (without path). The second is the pid (integer) and the third is the service ID. Example: /usr/local/bin/gdb /usr/cyrus/bin/%s %d

defaultacl: anyone lrs

The Access Control List (ACL) placed on a newly-created (non-user) mailbox that does not have a parent mailbox.

defaultdomain: internal

The default domain for virtual domain support

defaultpartition: <none>

The partition name used by default for new mailboxes. If not specified, the partition with the most free space will be used for new mailboxes.

Note that the partition specified by this option must also be specified as partition-name, where you substitute ‘name’ for the alphanumeric string you set defaultpartition to.

defaultsearchtier: <empty string>

Name of the default tier that messages will be indexed to. Search indexes can be organized in tiers to allow index storage in different directories and physical media. See the man page of squatter for details. The default search tier also requires the definition of an according searchtierpartition-name entry.

This option MUST be specified for xapian search.

defaultserver: <none>

The backend server name used by default for new mailboxes. If not specified, the server with the most free space will be used for new mailboxes.

deletedprefix: DELETED

With delete_mode set to delayed, the deletedprefix setting defines the prefix for the hierarchy of deleted mailboxes.

The hierarchy delimiter will be automatically appended.

delete_mode: delayed

The manner in which mailboxes are deleted. In the default delayed mode, mailboxes that are being deleted are renamed to a special mailbox hierarchy under the deletedprefix, to be removed later by cyr_expire(8).

In immediate mode, the mailbox is removed from the filesystem immediately.

Allowed values: immediate, delayed

delete_unsubscribe: 0

Whether to also unsubscribe from mailboxes when they are deleted. Note that this behaviour contravenes RFC 3501 section 6.3.9, but may be useful for avoiding user/client software confusion. The default is ‘no’.

deleteright: c

Deprecated - only used for backwards compatibility with existing installations. Lists the old RFC 2086 right which was used to grant the user the ability to delete a mailbox. If a user has this right, they will automatically be given the new ‘x’ right.

disable_user_namespace: 0

Preclude list command on user namespace. If set to ‘yes’, the LIST response will never include any other user’s mailbox. Admin users will always see all mailboxes. The default is ‘no’

disable_shared_namespace: 0

Preclude list command on shared namespace. If set to ‘yes’, the LIST response will never include any non-user mailboxes. Admin users will always see all mailboxes. The default is ‘no’

disconnect_on_vanished_mailbox: 0

If enabled, IMAP/POP3/NNTP clients will be disconnected by the server if the currently selected mailbox is (re)moved by another session. Otherwise, the missing mailbox is treated as empty while in use by the client.

ischedule_dkim_domain: <none>

The domain to be reported as doing iSchedule DKIM signing.

ischedule_dkim_key_file: <none>

File containing the private key for iSchedule DKIM signing.

ischedule_dkim_selector: <none>

Name of the selector subdividing the domain namespace. This specifies the actual key used for iSchedule DKIM signing within the domain.

duplicate_db: twoskip

The cyrusdb backend to use for the duplicate delivery suppression and sieve. Allowed values: skiplist, sql, twoskip, lmdb

duplicate_db_path: <none>

The absolute path to the duplicate db file. If not specified, will be configdirectory/deliver.db

duplicatesuppression: 1

If enabled, lmtpd will suppress delivery of a message to a mailbox if a message with the same message-id (or resent-message-id) is recorded as having already been delivered to the mailbox. Records the mailbox and message-id/resent-message-id of all successful deliveries.

event_content_inclusion_mode: standard

The mode in which message content may be included with MessageAppend and MessageNew. “standard” mode is the default behavior in which message is included up to a size with the notification. In “message” mode, the message is included and may be truncated to a size. In “header” mode, it includes headers truncated to a size. In “body” mode, it includes body truncated to a size. In “headerbody” mode, it includes full headers and body truncated to a size Allowed values: standard, message, header, body, headerbody

event_content_size: 0

Truncate the message content that may be included with MessageAppend and MessageNew. Set 0 to include the entire message itself

event_exclude_flags: <none>

Don’t send event notification for given IMAP flag(s)

event_exclude_specialuse: \Junk

Don’t send event notification for folder with given special-use attributes. Set ALL for any folder

event_extra_params: timestamp

Space-separated list of extra parameters to add to any appropriated event.

Allowed values: bodyStructure, clientAddress, diskUsed, flagNames, messageContent, messageSize, messages, modseq, service, timestamp, uidnext, vnd.cmu.midset, vnd.cmu.unseenMessages, vnd.cmu.envelope, vnd.cmu.sessionId, vnd.cmu.mailboxACL, vnd.cmu.mbtype, vnd.cmu.davFilename, vnd.cmu.davUid, vnd.fastmail.clientId, vnd.fastmail.sessionId, vnd.fastmail.convExists, vnd.fastmail.convUnseen, vnd.fastmail.cid, vnd.fastmail.counters

event_groups: message mailbox

Space-separated list of groups of related events to turn on notification

Allowed values: message, quota, flags, access, mailbox, subscription, calendar, applepushservice

event_notifier: <none>

Notifyd(8) method to use for “EVENT” notifications which are based on the RFC 5423. If not set, “EVENT” notifications are disabled.

expunge_mode: delayed

The mode in which messages (and their corresponding cache entries) are expunged. “default” mode is the old behavior in which the message files are purged at the time of the EXPUNGE, but index and cache records are retained to facilitate QRESYNC. (Note that this behaviour is no longer the default, but is so named for historical reasons.) In “delayed” mode, which is the default since Cyrus 2.5.0, the message files are also retained, allowing unexpunge to rescue them. In “immediate” mode, both the message files and the index records are removed as soon as possible. In all cases, nothing will be finally purged until all other processes have closed the mailbox to ensure they never see data disappear under them. In “default” or “delayed” mode, a later run of “cyr_expire” will clean out the retained records (and possibly message files). This reduces the amount of I/O that takes place at the time of EXPUNGE and should result in greater responsiveness for the client, especially when expunging a large number of messages. Allowed values: default, immediate, delayed

failedloginpause: 3

Number of seconds to pause after a failed login.

flushseenstate: 1

Deprecated. No longer used

foolstupidclients: 0

If enabled, only list the personal namespace when a LIST “*” is performed (it changes the request to a LIST “INBOX*”).

force_sasl_client_mech: <none>

Force preference of a given SASL mechanism for client side operations (e.g., murder environments). This is separate from (and overridden by) the ability to use the <host shortname>_mechs option to set preferred mechanisms for a specific host

fulldirhash: 0

If enabled, uses an improved directory hashing scheme which hashes on the entire username instead of using just the first letter as the hash. This changes hash algorithm used for quota and user directories and if hashimapspool is enabled, the entire mail spool.

Note that this option CANNOT be changed on a live system. The server must be quiesced and then the directories moved with the rehash utility.

hashimapspool: 0

If enabled, the partitions will also be hashed, in addition to the hashing done on configuration directories. This is recommended if one partition has a very bushy mailbox tree.

debug: 0

If enabled, allow syslog() to pass LOG_DEBUG messages.

hostname_mechs: <none>

Force a particular list of SASL mechanisms to be used when authenticating to the backend server hostname (where hostname is the short hostname of the server in question). If it is not specified it will query the server for available mechanisms and pick one to use. - Cyrus Murder

hostname_password: <none>

The password to use for authentication to the backend server hostname (where hostname is the short hostname of the server) - Cyrus Murder

httpallowcompress: 1

If enabled, the server will compress response payloads if the client indicates that it can accept them. Note that the compressed data will appear in telemetry logs, leaving only the response headers as human-readable.

httpallowcors: <none>

A wildmat pattern specifying a list of origin URIs ( scheme “://” host [ “:” port ] ) that are allowed to make Cross-Origin Resource Sharing (CORS) requests on the server. By default, CORS requests are disabled.

Note that the scheme and host should both be lowercase, the port should be omitted if using the default for the scheme (80 for http, 443 for https), and there should be no trailing ‘/’ (e.g.: “http://www.example.com:8080”, “https://example.org”).

httpallowtrace: 0

Allow use of the TRACE method.

Note that sensitive data might be disclosed by the response.

httpallowedurls: <none>

Space-separated list of relative URLs (paths) rooted at “httpdocroot” (see below) to be served by httpd. If set, this option will limit served static content to only those paths specified (returning “404 Not Found” to any other client requested URLs). Otherwise, httpd will serve any content found in “httpdocroot”.

Note that any path specified by “rss_feedlist_template” is an exception to this rule.

httpcontentmd5: 0

If enabled, HTTP responses will include a Content-MD5 header for the purpose of providing an end-to-end message integrity check (MIC) of the payload body. Note that enabling this option will use additional CPU to generate the MD5 digest, which may be ignored by clients anyways.

httpdocroot: <none>

If set, http will serve the static content (html/text/jpeg/gif files, etc) rooted at this directory. Otherwise, httpd will not serve any static content.

httpkeepalive: 20

Set the length of the HTTP server’s keepalive heartbeat in seconds. The default is 20. The minimum value is 0, which will disable the keepalive heartbeat. When enabled, if a request takes longer than httpkeepalive seconds to process, the server will send the client provisional responses every httpkeepalive seconds until the final response can be sent

httpmodules: <empty string>

Space-separated list of HTTP modules that will be enabled in httpd(8). This option has no effect on modules that are disabled at compile time due to missing dependencies (e.g. libical).

Note that “domainkey” depends on “ischedule” being enabled, and that both “freebusy” and “ischedule” depend on “caldav” being enabled. Allowed values: admin, caldav, carddav, domainkey, freebusy, ischedule, rss, tzdist, webdav

httpprettytelemetry: 0

If enabled, HTTP response payloads including server-generated markup languages (HTML, XML) will utilize line breaks and indentation to promote better human-readability in telemetry logs. Note that enabling this option will increase the amount of data sent across the wire.

httptimeout: 5

Set the length of the HTTP server’s inactivity autologout timer, in minutes. The default is 5. The minimum value is 0, which will disable persistent connections.

idlesocket: {configdirectory}/socket/idle

Unix domain socket that idled listens on.

ignorereference: 0

For backwards compatibility with Cyrus 1.5.10 and earlier – ignore the reference argument in LIST or LSUB commands.

imapidlepoll: 60

The interval (in seconds) for polling for mailbox changes and ALERTs while running the IDLE command. This option is used when idled is not enabled or cannot be contacted. The minimum value is 1. A value of 0 will disable IDLE.

imapidresponse: 1

If enabled, the server responds to an ID command with a parameter list containing: version, vendor, support-url, os, os-version, command, arguments, environment. Otherwise the server returns NIL.

imapmagicplus: 0

Only list a restricted set of mailboxes via IMAP by using userid+namespace syntax as the authentication/authorization id. Using userid+ (with an empty namespace) will list only subscribed mailboxes.

imipnotifier: <none>

Notifyd(8) method to use for “IMIP” notifications which are based on the RFC 6047. If not set, “IMIP” notifications are disabled.

implicit_owner_rights: lkxa

The implicit Access Control List (ACL) for the owner of a mailbox.

@include: <none>

Directive which includes the specified file as part of the configuration. If the path to the file is not absolute, CYRUS_PATH is prepended.

improved_mboxlist_sort: 0

If enabled, a special comparator will be used which will correctly sort mailbox names that contain characters such as ‘ ‘ and ‘-‘.

Note that this option SHOULD NOT be changed on a live system. The mailboxes database should be dumped (ctl_mboxlist) before the option is changed, removed, and then undumped after changing the option. When not using flat files for the subscriptions databases the same has to be done (cyr_dbtool) for each subscription database See improved_mboxlist_sort.html.

internaldate_heuristic: standard

Mechanism to determine email internaldates on delivery/reconstruct. “standard” uses time() when delivering a message, mtime on reconstruct. “receivedheader” looks at the top most Received header or time/mtime otherwise Allowed values: standard, receivedheader

iolog: 0

Should cyrus output I/O log entries

ldap_authz: <none>

SASL authorization ID for the LDAP server

ldap_base: <empty string>

Contains the LDAP base dn for the LDAP ptloader module

ldap_bind_dn: <none>

Bind DN for the connection to the LDAP server (simple bind). Do not use for anonymous simple binds

ldap_deref: never

Specify how aliases dereferencing is handled during search.

Allowed values: search, find, always, never

ldap_domain_base_dn: <empty string>

Base DN to search for domain name spaces.

ldap_domain_filter: (&(objectclass=domainrelatedobject)(associateddomain=%s))

Filter to use searching for domains

ldap_domain_name_attribute: associateddomain

The attribute name for domains.

ldap_domain_scope: sub

Search scope

Allowed values: sub, one, base

ldap_domain_result_attribute: inetdomainbasedn

Result attribute

ldap_filter: (uid=%u)

Specify a filter that searches user identifiers. The following tokens can be used in the filter string:

%% = % %u = user %U = user portion of %u (%U = test when %u = test@domain.tld) %d = domain portion of %u if available (%d = domain.tld when %u = %test@domain.tld), otherwise same as %r %D = user dn. (use when ldap_member_method: filter) %1-9 = domain tokens (%1 = tld, %2 = domain when %d = domain.tld)

ldap_filter is not used when ldap_sasl is enabled.

ldap_group_base: <empty string>

LDAP base dn for ldap_group_filter.

ldap_group_filter: (cn=%u)

Specify a filter that searches for group identifiers. See ldap_filter for more options.

ldap_group_scope: sub

Specify search scope for ldap_group_filter.

Allowed values: sub, one, base

ldap_id: <none>

SASL authentication ID for the LDAP server

ldap_mech: <none>

SASL mechanism for LDAP authentication

ldap_user_attribute: <none>

Specify LDAP attribute to use as canonical user id

ldap_member_attribute: <none>

See ldap_member_method.

ldap_member_base: <empty string>

LDAP base dn for ldap_member_filter.

ldap_member_filter: (member=%D)

Specify a filter for “ldap_member_method: filter”. See ldap_filter for more options.

ldap_member_method: attribute

Specify a group method. The “attribute” method retrieves groups from a multi-valued attribute specified in ldap_member_attribute.

The “filter” method uses a filter, specified by ldap_member_filter, to find groups; ldap_member_attribute is a single-value attribute group name. Allowed values: attribute, filter

ldap_member_scope: sub

Specify search scope for ldap_member_filter.

Allowed values: sub, one, base

ldap_password: <none>

Password for the connection to the LDAP server (SASL and simple bind). Do not use for anonymous simple binds

ldap_realm: <none>

SASL realm for LDAP authentication

ldap_referrals: 0

Specify whether or not the client should follow referrals.

ldap_restart: 1

Specify whether or not LDAP I/O operations are automatically restarted if they abort prematurely.

ldap_sasl: 1

Use SASL for LDAP binds in the LDAP PTS module.

ldap_sasl_authc: <none>

Deprecated. Use ldap_id

ldap_sasl_authz: <none>

Deprecated. Use ldap_authz

ldap_sasl_mech: <none>

Deprecated. Use ldap_mech

ldap_sasl_password: <none>

Deprecated. User ldap_password

ldap_sasl_realm: <none>

Deprecated. Use ldap_realm

ldap_scope: sub

Specify search scope.

Allowed values: sub, one, base

ldap_servers: ldap://localhost/

Deprecated. Use ldap_uri

ldap_size_limit: 1

Specify a number of entries for a search request to return.

ldap_start_tls: 0

Use transport layer security for ldap:// using STARTTLS. Do not use ldaps:// in ‘ldap_uri’ with this option enabled.

ldap_time_limit: 5

Specify a number of seconds for a search request to complete.

ldap_timeout: 5

Specify a number of seconds a search can take before timing out.

ldap_ca_dir: <none>

Path to a directory with CA (Certificate Authority) certificates.

ldap_ca_file: <none>

Patch to a file containing CA (Certificate Authority) certificate(s).

ldap_ciphers: <none>

List of SSL/TLS ciphers to allow. The format of the string is described in ciphers(1).

ldap_client_cert: <none>

File containing the client certificate.

ldap_client_key: <none>

File containing the private client key.

ldap_verify_peer: 0

Require and verify server certificate. If this option is yes, you must specify ldap_ca_file or ldap_ca_dir.

ldap_tls_cacert_dir: <none>

Deprecated in favor of ldap_ca_dir.

ldap_tls_cacert_file: <none>

Deprecated in favor of ldap_ca_file.

ldap_tls_cert: <none>

Deprecated in favor of ldap_client_cert.

ldap_tls_key: <none>

Deprecated in favor of ldap_client_key.

ldap_tls_check_peer: 0

Deprecated in favor of ldap_verify_peer.

ldap_tls_ciphers: <none>

Deprecated in favor of ldap_ciphers.

ldap_uri: <none>

Contains a list of the URLs of all the LDAP servers when using the LDAP PTS module.

ldap_version: 3

Specify the LDAP protocol version. If ldap_start_tls and/or ldap_use_sasl are enabled, ldap_version will be automatically set to 3.

literalminus: 0

if enabled, CAPABILITIES will reply with LITERAL- rather than LITERAL+ (RFC 7888). Doesn’t actually size-restrict uploads though

lmtp_downcase_rcpt: 1

If enabled, lmtpd will convert the recipient addresses to lowercase (up to a ‘+’ character, if present).

lmtp_fuzzy_mailbox_match: 0

If enabled, and the mailbox specified in the detail part of the recipient (everything after the ‘+’) does not exist, lmtpd will try to find the closest match (ignoring case, ignoring whitespace, falling back to parent) to the specified mailbox name.

lmtp_over_quota_perm_failure: 0

If enabled, lmtpd returns a permanent failure code when a user’s mailbox is over quota. By default, the failure is temporary, causing the MTA to queue the message and retry later.

lmtp_strict_quota: 0

If enabled, lmtpd returns a failure code when the incoming message will cause the user’s mailbox to exceed its quota. By default, the failure won’t occur until the mailbox is already over quota.

lmtp_strict_rfc2821: 1

By default, lmtpd will be strict (per RFC 2821) with regards to which envelope addresses are allowed. If this option is set to false, 8bit characters in the local-part of envelope addresses are changed to ‘X’ instead. This is useful to avoid generating backscatter with certain MTAs like Postfix or Exim which accept such messages.

lmtpsocket: {configdirectory}/socket/lmtp

Unix domain socket that lmtpd listens on, used by deliver(8). This should match the path specified in cyrus.conf(5).

lmtptxn_timeout: 300

Timeout (in seconds) used during a lmtp transaction to a remote backend (e.g. in a murder environment). Can be used to prevent hung lmtpds on proxy hosts when a backend server becomes unresponsive during a lmtp transaction. The default is 300 - change to zero for infinite.

loginrealms: <empty string>

The list of remote realms whose users may authenticate using cross-realm authentication identifiers. Separate each realm name by a space. (A cross-realm identity is considered any identity returned by SASL with an “@” in it.).

loginuseacl: 0

If enabled, any authentication identity which has a rights on a user’s INBOX may log in as that user.

logtimestamps: 0

Include notations in the protocol telemetry logs indicating the number of seconds since the last command or response.

mailbox_default_options: 0

Default “options” field for the mailbox on create. You’ll want to know what you’re doing before setting this, but it can apply some default annotations like duplicate suppression

mailbox_initial_flags: <none>

space-separated list of permanent flags which will be pre-set in every newly created mailbox. If you know you will require particular flag names then this avoids a possible race condition against a client that fills the entire 128 available slots. Default is NULL, which is no flags. Example: $Label1 $Label2 $Label3 NotSpam Spam

mailnotifier: <none>

Notifyd(8) method to use for “MAIL” notifications. If not set, “MAIL” notifications are disabled.

maxheaderlines: 1000

Maximum number of lines of header that will be processed into cache records. Default 1000. If set to zero, it is unlimited. If a message hits the limit, an error will be logged and the rest of the lines in the header will be skipped. This is to avoid malformed messages causing giant cache records

maxlogins_per_host: 0

Maximum number of logged in sessions allowed per host, zero means no limit

maxlogins_per_user: 0

Maximum number of logged in sessions allowed per user, zero means no limit

maxmessagesize: 0

Maximum incoming LMTP message size. If non-zero, lmtpd will reject messages larger than maxmessagesize bytes. If set to 0, this will allow messages of any size (the default).

maxquoted: 131072

Maximum size of a single quoted string for the parser. Default 128k

maxword: 131072

Maximum size of a single word for the parser. Default 128k

mboxkey_db: twoskip

The cyrusdb backend to use for mailbox keys.

Allowed values: skiplist, twoskip, lmdb

mboxlist_db: twoskip

The cyrusdb backend to use for the mailbox list.

Allowed values: flat, skiplist, sql, twoskip, lmdb

mboxlist_db_path: <none>

The absolute path to the mailboxes db file. If not specified will be configdirectory/mailboxes.db

mboxname_lockpath: <none>

Path to mailbox name lock files (default $conf/lock)

metapartition_files: <empty string>

Space-separated list of metadata files to be stored on a metapartition rather than in the mailbox directory on a spool partition. Allowed values: header, index, cache, expunge, squat, annotations, lock, dav, archivecache

metapartition-name: <none>

The pathname of the metadata partition name, corresponding to spool partition partition-name. For any mailbox residing in a directory on partition-name, the metadata files listed in metapartition_files will be stored in a corresponding directory on metapartition-name. Note that not every partition-name option is required to have a corresponding metapartition-name option, so that you can selectively choose which spool partitions will have separate metadata partitions.

mupdate_authname: <none>

The SASL username (Authentication Name) to use when authenticating to the mupdate server (if needed).

mupdate_config: standard

The configuration of the mupdate servers in the Cyrus Murder. The “standard” config is one in which there are discreet frontend (proxy) and backend servers. The “unified” config is one in which a server can be both a frontend and backend. The “replicated” config is one in which multiple backend servers all share the same mailspool, but each have their own “replicated” copy of mailboxes.db. Allowed values: standard, unified, replicated

munge8bit: 1

If enabled, lmtpd munges messages with 8-bit characters in the headers. The 8-bit characters are changed to `X’. If reject8bit is enabled, setting munge8bit has no effect. (A proper solution to non-ASCII characters in headers is offered by RFC 2047 and its predecessors.)

mupdate_connections_max: 128

The max number of connections that a mupdate process will allow, this is related to the number of file descriptors in the mupdate process. Beyond this number connections will be immediately issued a BYE response.

mupdate_password: <none>

The SASL password (if needed) to use when authenticating to the mupdate server.

mupdate_port: 3905

The port of the mupdate server for the Cyrus Murder

mupdate_realm: <none>

The SASL realm (if needed) to use when authenticating to the mupdate server.

mupdate_retry_delay: 20

The base time to wait between connection retries to the mupdate server.

mupdate_server: <none>

The mupdate server for the Cyrus Murder

mupdate_username: <empty string>

The SASL username (Authorization Name) to use when authenticating to the mupdate server

mupdate_workers_max: 50

The maximum number of mupdate worker threads (overall)

mupdate_workers_maxspare: 10

The maximum number of idle mupdate worker threads

mupdate_workers_minspare: 2

The minimum number of idle mupdate worker threads

mupdate_workers_start: 5

The number of mupdate worker threads to start

netscapeurl: <none>

If enabled at compile time, this specifies a URL to reply when Netscape asks the server where the mail administration HTTP server is. Administrators should set this to a local resource.

newsaddheaders: to

Space-separated list of headers to be added to incoming usenet articles. Added To: headers will contain email delivery addresses corresponding to each newsgroup in the Newsgroups: header. Added Reply-To: headers will contain email delivery addresses corresponding to each newsgroup in the Followup-To: or Newsgroups: header. If the specified header(s) already exist in an article, the email delivery addresses will be appended to the original header body(s).

This option applies if and only if the newspostuser option is set. Allowed values: to, replyto

newsgroups: *

A wildmat pattern specifying which mailbox hierarchies should be treated as newsgroups. Only mailboxes matching the wildmat will accept and/or serve articles via NNTP. If not set, a default wildmat of “*” (ALL shared mailboxes) will be used. If the newsprefix option is also set, the default wildmat will be translated to “<newsprefix>.*”

newsmaster: news

Userid that is used for checking access controls when executing Usenet control messages. For instance, to allow articles to be automatically deleted by cancel messages, give the “news” user the ‘d’ right on the desired mailboxes. To allow newsgroups to be automatically created, deleted and renamed by the corresponding control messages, give the “news” user the ‘c’ right on the desired mailbox hierarchies.

newspeer: <none>

A list of whitespace-separated news server specifications to which articles should be fed. Each server specification is a string of the form [user[:pass]@]host[:port][/wildmat] where ‘host’ is the fully qualified hostname of the server, ‘port’ is the port on which the server is listening, ‘user’ and ‘pass’ are the authentication credentials and ‘wildmat’ is a pattern that specifies which groups should be fed. If no ‘port’ is specified, port 119 is used. If no ‘wildmat’ is specified, all groups are fed. If ‘user’ is specified (even if empty), then the NNTP POST command will be used to feed the article to the server, otherwise the IHAVE command will be used.

A ‘@’ may be used in place of ‘!’ in the wildmat to prevent feeding articles cross-posted to the given group, otherwise cross-posted articles are fed if any part of the wildmat matches. For example, the string “peer.example.com:*,!control.*,@local.*” would feed all groups except control messages and local groups to peer.example.com. In the case of cross-posting to local groups, these articles would not be fed.

newspostuser: <none>

Userid used to deliver usenet articles to newsgroup folders (usually via lmtp2nntp). For example, if set to “post”, email sent to “post+comp.mail.imap” would be delivered to the “comp.mail.imap” folder.

When set, the Cyrus NNTP server will add the header(s) specified in the newsaddheaders option to each incoming usenet article. The added header(s) will contain email delivery addresses corresponding to each relevant newsgroup. If not set, no headers are added to usenet articles.

newsprefix: <none>

Prefix to be prepended to newsgroup names to make the corresponding IMAP mailbox names.

newsrc_db_path: <none>

The absolute path to the newsrc db file. If not specified, will be configdirectory/fetchnews.db

nntptimeout: 3

Set the length of the NNTP server’s inactivity autologout timer, in minutes. The minimum value is 3, the default.

notesmailbox: <none>

The top level mailbox in each user’s account which is used to store * Apple-style Notes. Default is blank (disabled)

notifysocket: {configdirectory}/socket/notify

Unix domain socket that the mail notification daemon listens on.

notify_external: <none>

Path to the external program that notifyd(8) will call to send mail notifications.

The external program will be called with the following command line options:

-c    class
-p    priority
-u    user
-m    mailbox

And the notification message will be available on stdin.

partition-name: <none>

The pathname of the partition name. At least one partition pathname MUST be specified. If the defaultpartition option is used, then its pathname MUST be specified. For example, if the value of the defaultpartion option is part1, then the partition-part1 field is required.

outbox_sendlater: 0

If enabled, any message with a Draft flag will be sent at the time of its INTERNALDATE

partition_select_mode: freespace-most

Partition selection mode.

random

(pseudo-)random selection

freespace-most

partition with the most free space (KiB)

freespace-percent-most

partition with the most free space (%)

freespace-percent-weighted

each partition is weighted according to its free space (%); the more free space the partition has, the more chances it has to be selected

freespace-percent-weighted-delta

each partition is weighted according to its difference of free space (%) compared to the most used partition; the more the partition is lagging behind the most used partition, the more chances it has to be selected

Note that actually even the most used partition has a few chances to be selected, and those chances increase when other partitions get closer

Allowed values: random, freespace-most, freespace-percent-most, freespace-percent-weighted, freespace-percent-weighted-delta

partition_select_exclude: <none>

List of partitions to exclude from selection mode.

partition_select_usage_reinit: 0

For a given session, number of operations (e.g. partition selection) for which partitions usage data are cached.

partition_select_soft_usage_limit: 0

Limit of partition usage (%): if a partition is over that limit, it is automatically excluded from selection mode.

If all partitions are over that limit, this feature is not used anymore.

plaintextloginpause: 0

Number of seconds to pause after a successful plaintext login. For systems that support strong authentication, this permits users to perceive a cost of using plaintext passwords. (This does not affect the use of PLAIN in SASL authentications.)

plaintextloginalert: <none>

Message to send to client after a successful plaintext login.

popexpiretime: -1

The number of days advertised as being the minimum a message may be left on the POP server before it is deleted (via the CAPA command, defined in the POP3 Extension Mechanism, which some clients may support). “NEVER”, the default, may be specified with a negative number. The Cyrus POP3 server never deletes mail, no matter what the value of this parameter is. However, if a site implements a less liberal policy, it needs to change this parameter accordingly.

popminpoll: 0

Set the minimum amount of time the server forces users to wait between successive POP logins, in minutes.

popsubfolders: 0

Allow access to subfolders of INBOX via POP3 by using userid+subfolder syntax as the authentication/authorization id.

poppollpadding: 1

Create a softer minimum poll restriction. Allows poppollpadding connections before the minpoll restriction is triggered. Additionally, one padding entry is recovered every popminpoll minutes. This allows for the occasional polling rate faster than popminpoll, (i.e., for clients that require a send/receive to send mail) but still enforces the rate long-term. Default is 1 (disabled).

The easiest way to think of it is a queue of past connections, with one slot being filled for every connection, and one slot being cleared every popminpoll minutes. When the queue is full, the user will not be able to check mail again until a slot is cleared. If the user waits a sufficient amount of time, they will get back many or all of the slots.

poptimeout: 10

Set the length of the POP server’s inactivity autologout timer, in minutes. The minimum value is 10, the default.

popuseacl: 0

Enforce IMAP ACLs in the pop server. Due to the nature of the POP3 protocol, the only rights which are used by the pop server are ‘r’, ‘t’, and ‘s’ for the owner of the mailbox. The ‘r’ right allows the user to open the mailbox and list/retrieve messages. The ‘t’ right allows the user to delete messages. The ‘s’ right allows messages retrieved by the user to have the \Seen flag set (only if popuseimapflags is also enabled).

popuseimapflags: 0

If enabled, the pop server will set and obey IMAP flags. Messages having the \Deleted flag are ignored as if they do not exist. Messages that are retrieved by the client will have the \Seen flag set. All messages will have the \Recent flag unset.

postmaster: postmaster

Username that is used as the ‘From’ address in rejection MDNs produced by sieve.

postuser: <empty string>

Userid used to deliver messages to shared folders. For example, if set to “bb”, email sent to “bb+shared.blah” would be delivered to the “shared.blah” folder. By default, an email address of “+shared.blah” would be used.

proc_path: <none>

Path to proc directory. Default is NULL - must be an absolute path if specified. If not specified, the path $configdirectory/proc/ will be used.

proxy_authname: proxy

The authentication name to use when authenticating to a backend server in the Cyrus Murder.

proxy_compress: 0

Try to enable protocol-specific compression when performing a client connection to a backend server in the Cyrus Murder.

Note that this should only be necessary over slow network connections. Also note that currently only IMAP and MUPDATE support compression.

proxy_password: <none>

The default password to use when authenticating to a backend server in the Cyrus Murder. May be overridden on a host-specific basis using the hostname_password option.

proxy_realm: <none>

The authentication realm to use when authenticating to a backend server in the Cyrus Murder

proxyd_allow_status_referral: 0

Set to true to allow proxyd to issue referrals to clients that support it when answering the STATUS command. This is disabled by default since some clients issue many STATUS commands in a row, and do not cache the connections that these referrals would cause, thus resulting in a higher authentication load on the respective backend server.

proxyd_disable_mailbox_referrals: 0

Set to true to disable the use of mailbox-referrals on the proxy servers.

proxyservers: <none>

A list of users and groups that are allowed to proxy for other users, separated by spaces. Any user listed in this will be allowed to login for any other user: use with caution. In a standard murder this option should ONLY be set on backends. DO NOT SET on frontends or things won’t work properly.

pts_module: afskrb

The PTS module to use.

Allowed values: afskrb, ldap

ptloader_sock: <none>

Unix domain socket that ptloader listens on. (defaults to configdirectory/ptclient/ptsock)

ptscache_db: twoskip

The cyrusdb backend to use for the pts cache.

Allowed values: skiplist, twoskip, lmdb

ptscache_db_path: <none>

The absolute path to the ptscache db file. If not specified, will be configdirectory/ptscache.db

ptscache_timeout: 10800

The timeout (in seconds) for the PTS cache database when using the auth_krb_pts authorization method (default: 3 hours).

ptskrb5_convert524: 1

When using the AFSKRB ptloader module with Kerberos 5 canonicalization, do the final 524 conversion to get a n AFS style name (using ‘.’ instead of ‘/’, and using short names

ptskrb5_strip_default_realm: 1

When using the AFSKRB ptloader module with Kerberos 5 canonicalization, strip the default realm from the userid (this does not affect the stripping of realms specified by the afspts_localrealms option)

qosmarking: cs0

This specifies the Class Selector or Differentiated Services Code Point designation on IP headers (in the ToS field). Allowed values: cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, ef

quota_db: quotalegacy

The cyrusdb backend to use for quotas.

Allowed values: flat, skiplist, sql, quotalegacy, twoskip, lmdb

quota_db_path: <none>

The absolute path for the quota database (if you choose a single-file quota DB type - or the base path if you choose quotalegacy). If not specified will be configdirectory/quotas.db or configdirectory/quota/

quotawarn: 90

The percent of quota utilization over which the server generates warnings.

quotawarnkb: 0

The maximum amount of free space (in kB) at which to give a quota warning (if this value is 0, or if the quota is smaller than this amount, then warnings are always given).

quotawarnmsg: 0

The maximum amount of messages at which to give a quota warning (if this value is 0, or if the quota is smaller than this amount, then warnings are always given).

reject8bit: 0

If enabled, lmtpd rejects messages with 8-bit characters in the headers.

restore_authname: <none>

The authentication used by the restore tool when authenticating to an IMAP/sync server.

restore_password: <none>

The password used by the restore tool when authenticating to an IMAP/sync server.

restore_realm: <none>

The authentication realm used by the restore tool when authenticating to an IMAP/sync server.

reverseacls: 0

At startup time, ctl_cyrusdb -r will check this value and it will either add or remove reverse ACL pointers from mailboxes.db

rfc2046_strict: 0

If enabled, imapd will be strict (per RFC 2046) when matching MIME boundary strings. This means that boundaries containing other boundaries as substrings will be treated as identical. Since enabling this option will break some messages created by Eudora 5.1 (and earlier), it is recommended that it be left disabled unless there is good reason to do otherwise.

rfc2047_utf8: 0

If enabled, imapd will parse any non-encoded character sequence in MIME header values as UTF8. This is useful for installations that either advertise the UTF8SMTP (RFC 5335) extension or receive mails with improperly escaped UTF-8 byte sequences. It is recommended that this option is left disabled unless there is good reason to do otherwise.

rfc3028_strict: 1

If enabled, Sieve will be strict (per RFC 3028) with regards to which headers are allowed to be used in address and envelope tests. This means that only those headers which are defined to contain addresses will be allowed in address tests and only “to” and “from” will be allowed in envelope tests. When disabled, ANY grammatically correct header will be allowed.

rss_feedlist_template: <none>

File containing HTML that will be used as a template for displaying the list of available RSS feeds. A single instance of the variable %RSS_FEEDLIST% should appear in the file, which will be replaced by a nested unordered list of feeds. The toplevel unordered list will be tagged with an id of “feed” (<ul id=’feed’>) which can be used by stylesheet(s) in your template. The dynamically created list of feeds based on the HTML template will be accessible at the “/rss” URL on the server.

rss_feeds: *

A wildmat pattern specifying which mailbox hierarchies should be treated as RSS feeds. Only mailboxes matching the wildmat will have their messages available via RSS. If not set, a default wildmat of “*” (ALL mailboxes) will be used.

rss_maxage: 0

Maximum age (in days) of items to display in an RSS channel. If non-zero, httpd will only display items received within the last rss_maxage days. If set to 0, all available items will be displayed (the default).

rss_maxitems: 0

Maximum number of items to display in an RSS channel. If non-zero, httpd will display no more than the rss_maxitems most recent items. If set to 0, all available items will be displayed (the default).

rss_maxsynopsis: 0

Maximum RSS item synopsis length. If non-zero, httpd will display no more than the first rss_maxsynopsis characters of an item’s synopsis. If set to 0, the entire synopsis will be displayed (the default).

rss_realm: <none>

The realm to present for HTTP authentication of RSS feeds. If not set (the default), the value of the “servername” option will be used.

sasl_auto_transition: 0

If enabled, the SASL library will automatically create authentication secrets when given a plaintext password. See the SASL documentation.

sasl_maximum_layer: 256

Maximum SSF (security strength factor) that the server will allow a client to negotiate.

sasl_minimum_layer: 0

The minimum SSF that the server will allow a client to negotiate. A value of 1 requires integrity protection; any higher value requires some amount of encryption.

sasl_option: 0

Any SASL option can be set by preceding it with sasl_. This file overrides the SASL configuration file.

sasl_pwcheck_method: <none>

The mechanism used by the server to verify plaintext passwords. Possible values include “auxprop”, “saslauthd”, and “pwcheck”.

search_batchsize: 20

The number of messages to be indexed in one batch (default 20). Note that long batches may delay user commands or mail delivery.

search_normalisation_max: 1000

A resource bound for the combinatorial explosion of search expression tree complexity caused by normalising expressions with many OR nodes. These can use more CPU time to optimise than they save IO time in scanning folders.

search_engine: none

The indexing engine used to speed up searching.

Allowed values: none, squat, sphinx, xapian

search_fuzzy_always: 0

Whether to enable RFC 6203 FUZZY search for all IMAP SEARCH. If turned on, search attributes will be searched using FUZZY search by default. If turned off, clients have to explicitly use the FUZZY search key to enable fuzzy search for regular SEARCH commands.

search_index_headers: 1

Whether to index headers other than From, To, Cc, Bcc, and Subject. Experiment shows that some headers such as Received and DKIM-Signature can contribute up to 2/3rds of the index size but almost nothing to the utility of searching. Note that is header indexing is disabled, headers can still be searched, the searches will just be slower.

search_indexed_db: twoskip

The cyrusdb backend to use for the search latest indexed uid state.

Allowed values: flat, skiplist, twoskip, lmdb

search_maxtime: <none>

The maximum number of seconds to run a search for before aborting. Default of no value means search “forever” until other timeouts.

search_skipdiacrit: 1

When searching, should diacriticals be stripped from the search terms. The default is “true”, a search for “hav” will match “Håvard”. This is not RFC 5051 compliant, but it backwards compatible, and may be preferred by some sites.

search_skiphtml: 0

If enabled, HTML parts of messages are skipped, i.e. not indexed and not searchable. Otherwise, they’re indexed.

search_whitespace: merge

When searching, how whitespace should be handled. Options are: “skip” (default in 2.3 and earlier series) - where a search for “equi” would match “the quick brown fox”. “merge” - the default, where “he qu” would match “the quick brownfox”, and “keep”, where whitespace must match exactly. The default of “merge” is recommended for most cases - it’s a good compromise which keeps words separate. Allowed values: skip, merge, keep

search_snippet_length: 255

The maximum byte length of a snippet generated by the XSNIPPETS command. Only supported by the Xapian search backend, which attempts to always fill search_snippet_length bytes in the generated snippet.

search_stopword_path: <none>

The absolute base path to the search stopword lists. If not specified, no stopwords will be taken into account during search indexing. Currently, the only supported and default stop word file is english.list.

searchpartition-name: <none>

The pathname where to store the xapian search indexes of searchtier for mailboxes of partition name. This must be configured for the defaultsearchtier and any additional search tier (see squatter for details).

For example: if defaultpartition is defined as part1 and defaultsearchtier as tier1 then the configuration must contain an entry tier1searchpartition-part1 that defines the path where to store this tier1’s search index for the part1 partition.

This option MUST be specified for xapian search.

seenstate_db: twoskip

The cyrusdb backend to use for the seen state.

Allowed values: flat, skiplist, twoskip, lmdb

sendmail: /usr/lib/sendmail

The pathname of the sendmail executable. Sieve invokes sendmail for sending rejections, redirects and vacation responses.

serverlist: <none>

Whitespace separated list of backend server names. Used for finding server with the most available free space for proxying CREATE.

serverlist_select_mode: freespace-most

Server selection mode.

random

(pseudo-)random selection

freespace-most

backend with the most (total) free space (KiB)

freespace-percent-most

backend whose partition has the most free space (%)

freespace-percent-weighted

same as for partition selection, comparing the free space (%) of the least used partition of each backend

freespace-percent-weighted-delta

same as for partition selection, comparing the free space (%) of the least used partition of each backend.

Allowed values: random, freespace-most, freespace-percent-most, freespace-percent-weighted, freespace-percent-weighted-delta

serverlist_select_usage_reinit: 0

For a given session, number of operations (e.g. backend selection) for which backend usage data are cached.

serverlist_select_soft_usage_limit: 0

Limit of backend usage (%): if a backend is over that limit, it is automatically excluded from selection mode.

If all backends are over that limit, this feature is not used anymore.

servername: <none>

This is the hostname visible in the greeting messages of the POP, IMAP and LMTP daemons. If it is unset, then the result returned from gethostname(2) is used. This is also the value used by murder clusters to identify the host name. It should be resolvable by DNS to the correct host, and unique within an active cluster. If you are using low level replication (e.g. drbd) then it should be the same on each copy and the DNS name should also be moved to the new master on failover.

serverinfo: on

The server information to display in the greeting and capability responses. Information is displayed as follows:

“off” = no server information in the greeting or capabilities

“min” = servername in the greeting; no server information in the capabilities

“on” = servername and product version in the greeting; product version in the capabilities

Allowed values: off, min, on

sharedprefix: Shared Folders

If using the alternate IMAP namespace, the prefix for the shared namespace. The hierarchy delimiter will be automatically appended.

sieve_allowreferrals: 1

If enabled, timsieved will issue referrals to clients when the user’s scripts reside on a remote server (in a Murder). Otherwise, timsieved will proxy traffic to the remote server.

sieve_extensions: fileinto reject vacation vacation-seconds imapflags notify envelope relational regex subaddress copy date index imap4flags mailbox mboxmetadata servermetadata variables

Space-separated list of Sieve extensions allowed to be used in sieve scripts, enforced at submission by timsieved(8). Any previously installed script will be unaffected by this option and will continue to execute regardless of the extensions used. This option has no effect on options that are disabled at compile time (e.g., “regex”). Allowed values: fileinto, reject, vacation, vacation-seconds, imapflags, notify, include, envelope, body, relational, regex, subaddress, copy, date, index, imap4flags, mailbox, mboxmetadata, servermetadata, variables

sieve_maxscriptsize: 32

Maximum size (in kilobytes) any sieve script can be, enforced at submission by timsieved(8).

sieve_maxscripts: 5

Maximum number of sieve scripts any user may have, enforced at submission by timsieved(8).

sieve_utf8fileinto: 0

If enabled, the sieve engine expects folder names for the fileinto action in scripts to use UTF8 encoding. Otherwise, modified UTF7 encoding should be used.

sieve_sasl_send_unsolicited_capability: 0

If enabled, timsieved will emit a capability response after a successful SASL authentication, per draft-martin-managesieve-12.txt .

sieve_vacation_min_response: 259200 /* 3 days */

Minimum time interval (in seconds) between consecutive vacation responses, per draft-ietf-vacation-seconds.txt .

sieve_vacation_max_response: 7776000 /* 90 days */

Maximum time interval (in seconds) between consecutive vacation responses, per draft-ietf-vacation-seconds.txt .

sievedir: /usr/sieve

If sieveusehomedir is false, this directory is searched for Sieve scripts.

sievenotifier: <none>

Notifyd(8) method to use for “SIEVE” notifications. If not set, “SIEVE” notifications are disabled.

This method is only used when no method is specified in the script.

sieveusehomedir: 0

If enabled, lmtpd will look for Sieve scripts in user’s home directories: ~user/.sieve.

anysievefolder: 0

It must be “yes” in order to permit the autocreation of any INBOX subfolder requested by a sieve filter, through the “fileinto” action. (default = no)

singleinstancestore: 1

If enabled, imapd, lmtpd and nntpd attempt to only write one copy of a message per partition and create hard links, resulting in a potentially large disk savings.

skiplist_always_checkpoint: 1

If enabled, this option forces the skiplist cyrusdb backend to always checkpoint when doing a recovery. This causes slightly more IO, but on the other hand leads to more efficient databases, and the entire file is already “hot”.

skiplist_unsafe: 0

If enabled, this option forces the skiplist cyrusdb backend to not sync writes to the disk. Enabling this option is NOT RECOMMENDED.

soft_noauth: 1

If enabled, lmtpd returns temporary failures if the client does not successfully authenticate. Otherwise lmtpd returns permanent failures (causing the mail to bounce immediately).

sortcache_db: twoskip

The cyrusdb backend to use for caching sort results (currently only used for xconvmultisort) Allowed values: skiplist, twoskip, lmdb

specialuse_extra: <none>

Whitespace separated list of extra special-use attributes that can be set on a mailbox. RFC 6154 currently lists what special-use attributes can be set. This allows extending that list in the future or adding your own if needed.

specialusealways: 0

If enabled, this option causes LIST and LSUB output to always include the XLIST “special-use” flags

sphinx_text_excludes_odd_headers: 0

If enabled, Sphinx will perform a TEXT search as if it matches FROM, TO, CC, BCC or SUBJECT but not any other headers. This is contrary to the RFC but a more useful behaviour for most users. Default: disabled.

sphinx_socket: {configdirectory}/socket/sphinx

Unix domain socket that the Sphinx searchd daemons listens on.

sphinx_pidfile: /var/run/sphinx.pid

File where the Sphinx searchd daemon writes its pid.

sql_database: <none>

Name of the database which contains the cyrusdb table(s).

sql_engine: <none>

Name of the SQL engine to use.

Allowed values: mysql, pgsql, sqlite

sql_hostnames: <empty string>

Comma separated list of SQL servers (in host[:port] format).

sql_passwd: <none>

Password to use for authentication to the SQL server.

sql_user: <none>

Username to use for authentication to the SQL server.

sql_usessl: 0

If enabled, a secure connection will be made to the SQL server.

srvtab: <empty string>

The pathname of srvtab file containing the server’s private key. This option is passed to the SASL library and overrides its default setting.

submitservers: <none>

A list of users and groups that are allowed to resolve “urlauth=submit+” IMAP URLs, separated by spaces. Any user listed in this will be allowed to fetch the contents of any valid “urlauth=submit+” IMAP URL: use with caution.

subscription_db: flat

The cyrusdb backend to use for the subscriptions list.

Allowed values: flat, skiplist, twoskip, lmdb

suppress_capabilities: <none>

Suppress the named capabilities from any capability response. Use the exact case as it appears in the response, e.g. “suppress_capabilities: ESEARCH QRESYNC WITHIN XLIST LIST-EXTENDED” if you have a murder with 2.3.x backends and don’t want clients being confused by new capabilities that some backends don’t support.

statuscache: 0

Enable/disable the imap status cache.

statuscache_db: twoskip

The cyrusdb backend to use for the imap status cache.

Allowed values: skiplist, sql, twoskip, lmdb

statuscache_db_path: <none>

The absolute path to the statuscache db file. If not specified, will be configdirectory/statuscache.db

sync_authname: <none>

The authentication name to use when authenticating to a sync server. Prefix with a channel name to only apply for that channel

sync_batchsize: 8192

the number of messages to upload in a single mailbox replication. Default is 8192. If there are more than this many messages appended to the mailbox, generate a synthetic partial state and send that.

sync_host: <none>

Name of the host (replica running sync_server(8)) to which replication actions will be sent by sync_client(8). Prefix with a channel name to only apply for that channel

sync_log: 0

Enable replication action logging by lmtpd(8), imapd(8), pop3d(8), and nntpd(8). The log {configdirectory}/sync/log is used by sync_client(8) for “rolling” replication.

sync_log_chain: 0

Enable replication action logging by sync_server as well, allowing chaining of replicas. Use this on ‘B’ for A => B => C replication layout

sync_log_channels: <none>

If specified, log all events to multiple log files in directories specified by each “channel”. Each channel can then be processed separately, such as by multiple sync_client(8)s in a mesh replication scheme, or by squatter(8) for rolling search index updates.

You can use “” (the two-character string U+22 U+22) to mean the default sync channel.

sync_log_unsuppressable_channels: squatter

If specified, the named channels are exempt from the effect of setting sync_log_chain:off, i.e. they are always logged to by the sync_server process. This is only really useful to allow rolling search indexing on a replica.

sync_password: <none>

The default password to use when authenticating to a sync server. Prefix with a channel name to only apply for that channel

sync_port: <none>

Name of the service (or port number) of the replication service on replica host. Prefix with a channel name to only apply for that channel. If not specified, and if sync_try_imap is set to “yes” (the default), then the replication client will first try “imap” (port 143) to check if imapd supports replication. otherwise it will default to “csync” (usually port 2005).

sync_realm: <none>

The authentication realm to use when authenticating to a sync server. Prefix with a channel name to only apply for that channel

sync_repeat_interval: 1

Minimum interval (in seconds) between replication runs in rolling replication mode. If a replication run takes longer than this time, we repeat immediately. Prefix with a channel name to only apply for that channel

sync_shutdown_file: <none>

Simple latch used to tell sync_client(8) that it should shut down at the next opportunity. Safer than sending signals to running processes. Prefix with a channel name to only apply for that channel

sync_timeout: 1800

Number of seconds to wait for a response before returning a timeout failure when talking to a replication peer (client or server).

sync_try_imap: 1

Whether sync_client should try to perform an IMAP connection before falling back to csync. If this is set to “no”, sync_client will only use csync. Prefix with a channel name to apply only for that channel

syslog_prefix: <none>

String to be prepended to the process name in syslog entries.

syslog_facility: <none>

Configure a syslog facility. The default is whatever is compiled in. Allowed values are: DAEMON, MAIL, NEWS, USER, and LOCAL0 through to LOCAL7

tcp_keepalive: 0

Enable keepalive on TCP connections

tcp_keepalive_cnt: 0

Number of TCP keepalive probes to send before declaring the connection dead (0 == system default)

tcp_keepalive_idle: 0

Number of seconds a connection must be idle before keepalive probes are sent (0 == system default)

tcp_keepalive_intvl: 0

Number of seconds between keepalive probes (0 == system default)

temp_path: /tmp

The pathname to store temporary files in

telemetry_bysessionid: 0

If true, log by sessionid instead of PID for telemetry

timeout: 32

The length of the IMAP server’s inactivity autologout timer, in minutes. The minimum value is 30. The default is 32 to allow a bit of leeway for clients that try to NOOP every 30 minutes.

imapidletimeout: 0

Timeout for idling clients (RFC 2177) in minutes. If set to zero (the default) or less, the value of “timeout” will be used instead.

tls_ca_file: <none>

Deprecated in favor of tls_client_ca_file.

tls_ca_path: <none>

Deprecated in favor of tls_client_ca_dir.

tlscache_db: twoskip

Deprecated in favor of tls_sessions_db.

tlscache_db_path: <none>

Deprecated in favor of tls_sessions_db_path.

tls_cert_file: <none>

Deprecated in favor of tls_server_cert.

tls_cipher_list: DEFAULT

Deprecated in favor of tls_ciphers.

tls_ciphers: DEFAULT

The list of SSL/TLS ciphers to allow. The format of the string (and definition of “DEFAULT”) is described in ciphers(1).

See also Mozilla’s server-side TLS recommendations:

https://wiki.mozilla.org/Security/Server_Side_TLS

tls_client_ca_dir: <none>

Path to a directory containing the CA certificates used to verify client SSL certificates used for authentication.

tls_client_ca_file: <none>

Path to a file containing the CA certificate(s) used to verify client SSL certificates used for authentication.

tls_client_cert: <none>

File containing the certificate presented to a server for authentication during STARTTLS. A value of “disabled” will disable this server’s use of certificate-based authentication.

tls_client_certs: optional

Disable (“off”), allow (“optional”, default) or require (“require”) the use of SSL certificates by clients to authenticate themselves. Allowed values: off, optional, require

tls_client_key: <none>

File containing the private key belonging to the tls_client_cert certificate. A value of “disabled” will disable this server’s use of certificate-based authentication.

tls_eccurve: prime256v1

The elliptic curve used for ECDHE. Default is NIST Suite B prime256. See ‘openssl ecparam -list_curves’ for possible values.

tls_key_file: <none>

Deprecated in favor of tls_server_key.

tls_required: 0

If enabled, require a TLS/SSL encryption layer to be negotiated prior to ANY authentication mechanisms being advertised or allowed.

tls_prefer_server_ciphers: 0

Prefer the ciphers on the server side instead of client side.

tls_server_ca_dir: <none>

Path to a directory with CA certificates used to verify certificates offered by the server, when cyrus acts as client. This directory must have filenames with the hashed value of the certificates (see openssl(1)).

tls_server_ca_file: <none>

Path to a file containing CA certificates used to verify certificates offered by the server, when cyrus acts as client.

tls_server_cert: <none>

File containing the certificate, including the full chain, presented to clients.

tls_server_key: <none>

File containing the private key belonging to the certificate in tls_server_cert.

tls_sessions_db: twoskip

The cyrusdb backend to use for the TLS cache.

Allowed values: skiplist, sql, twoskip, lmdb

tls_sessions_db_path: <none>

The absolute path to the TLS sessions db file. If not specified, will be configdirectory/tls_sessions.db

tls_session_timeout: 1440

The length of time (in minutes) that a TLS session will be cached for later reuse. The maximum value is 1440 (24 hours), the default. A value of 0 will disable session caching.

tls_versions: tls1_0 tls1_1 tls1_2 tls1_3

A list of SSL/TLS versions to not disable. Cyrus IMAP SSL/TLS starts with all protocols, and subtracts protocols not in this list. Newer versions of SSL/TLS will need to be added here to allow them to get disabled.

uidl_format: cyrus

Choose the format for UIDLs in pop3. Possible values are “uidonly”, “cyrus”, “dovecot” and “courier”. “uidonly” forces the old default of UID, “cyrus” is UIDVALIDITY.UID. Dovecot is 8 digits of leading hex (lower case) each UID UIDVALIDITY. Courier is UIDVALIDITY-UID. Allowed values: uidonly, cyrus, dovecot, courier

umask: 077

The umask value used by various Cyrus IMAP programs.

userdeny_db: flat

The cyrusdb backend to use for the user access list.

Allowed values: flat, skiplist, sql, twoskip, lmdb

userdeny_db_path: <none>

The absolute path to the userdeny db file. If not specified, will be configdirectory/user_deny.db

username_tolower: 1

Convert usernames to all lowercase before login/authentication. This is useful with authentication backends which ignore case during username lookups (such as LDAP).

userprefix: Other Users

If using the alternate IMAP namespace, the prefix for the other users namespace. The hierarchy delimiter will be automatically appended.

unix_group_enable: 1

Should we look up groups when using auth_unix (disable this if you are not using groups in ACLs for your IMAP server, and you are using auth_unix with a backend (such as LDAP) that can make getgrent() calls very slow)

unixhierarchysep: 1

Use the UNIX separator character ‘/’ for delimiting levels of mailbox hierarchy. Turn off to use the netnews separator character ‘.’. Note that with the newnews separator, no dots may occur in mailbox names. The default switched in 3.0 from off to on.

virtdomains: off

Configure virtual domain support.

off

Cyrus does not know or care about domains. Only the local part of email addresses is ever considered. This is not recommended for any deployment, but is currently the default.

userid

The user’s domain is determined by splitting a fully qualified userid at the last ‘@’ or ‘%’ symbol. If the userid is unqualified, the defaultdomain will be used. This is the recommended configuration for all deployments. If you wish to provide calendaring services you must use this configuration.

on

Fully qualified userids are respected, as per “userid”. Unqualified userids will have their domain determined by doing a reverse lookup on the IP address of the incoming network interface, or if no record is found, the defaultdomain will be used.

Allowed values: off, userid, on

xbackup_enabled: 0

Enable support for the XBACKUP command in imapd. If enabled, admin users can use this command to provoke a replication of specified users to the named backup channel.

xlist-flag: <none>

Set the special-use flag flag on the specified folder when it is autocreated (see the autocreate_inbox_folders option). For example, if xlist-junk: Spam is set, and the folder Spam is autocreated, the special-use flag \Junk will be set on it.

(This option is so named for backward compatibility with old config files.)

lmtp_catchall_mailbox: <none>

Mail sent to mailboxes which do not exist, will be delivered to this user. NOTE: This must be an existing local user name with an INBOX, NOT an email address!

zoneinfo_db: twoskip

The cyrusdb backend to use for zoneinfo.

Allowed values: flat, skiplist, twoskip, lmdb

zoneinfo_db_path: <none>

The absolute path to the zoneinfo db file. If not specified, will be configdirectory/zoneinfo.db

object_storage_enabled: 0

Is Object storage enabled for this server. You also need to have archiving enabled and archivepartition for the mailbox. Only email files will be stored on object Storage archive partition will be used to store any other files

object_storage_dummy_spool: <none>

Dummy object storage spool; this is for test only. Spool where user directory (container) will be created to store all emails in a flat structure

openio_namespace: <none>

The OpenIO namespace used to store archived email messages. A namespace identifies the physical platform cyrus must contact. This directive is used by the OpenIO’s SDK to locate its platform entry point.

openio_account: <none>

The OpenIO account used to account for stored emails. Accounts are unique in their namespace. They provides virtual partitions, with quotas and QoS features.

openio_rawx_timeout: 30

The OpenIO timeout to query to the RAWX services (default 30 sec).

openio_proxy_timeout: 5

The OpenIO timeout to query to the PROXY services (default 5 sec).

openio_autocreate: 0

Allow the OpenIO SDK to autocreate containers. Mainly destined to be turned on development environments. In production, the container should have been provisioned with the mailboxes.

openio_verbosity: <none>

Sets the logging verbosity of the OpenIO’s internal behavior. Admissible values are: “warning”, “notice”, “info”, “debug”, “trace”, “quiet”. The default verbosity is “warning”. Set to “notice” for a few lines on a per-client basis. Set to “info” for a few lines on a per-request basis. Set to “debug” Set to “trace” to activate the underlying libcurl debug output. Enabling a verbosity higher to equal than “debug” requires the cyrus to be set in debug mode. The special “quiet” value disables all kinds of logging at the GLib level.

caringo_hostname: <none>

The Caringo hostname used to store archived email messages. A hostname identifies the physical platform cyrus must contact. This directive is used by the Caringo’s SDK (CastorSDK: Caringo Simple Content Storage Protocol (SCSP) on HTTP 1.1 using a RESTful architecture

caringo_port: 80

The port of the caringo server (caringo_hostname); default is 80.

fastmailsharing: 0

If enabled, use FastMail style sharing (oldschool full server paths)

SEE ALSO

imapd(8), pop3d(8), nntpd(8), lmtpd(8), httpd(8), timsieved(8), idled(8), notifyd(8), deliver(8), master(8), ciphers(1)