Cyrus::IMAP::Shell - Perl version of cyradm
$ cyradm [--user authid] [--authz authzid] [--[no]rc] [--systemrc file] [--userrc file] \ > [--port n] [--auth mechanism] [--server] server
$ perl -MCyrus::IMAP::Shell -e 'run("myscript")'
or even (not recommended)
use Cyrus::IMAP::Admin::Shell; run('myscriptname');
This module implements cyradm in Perl. It is a shell around Cyrus::IMAP::Admin. Commands are provided in both Tcl-compatible forms and GNU-style long option forms.
The ``cyradm`` utility is a simple command line for performing common administrative tasks on a Cyrus IMAP server, written in Perl.
The cyradm utility can either be executed from a client where it has been installed and connect to the server via IMAP or it can be executed locally via a shell on the server.
cyradm understands /bin/sh-style redirection: any command can have its standard or error output redirected, with all sh-style redirections (except <>) supported. It does not currently understand pipes or backgrounding.
Authenticate with the specified username.
Authorize the connection as being the specified username.
(Do not) load the configuration files.
Use the system configuration file specified.
Use the user configuration file specified.
Connect to the *server* specified on the port specified.
Use the mechanism specified to authenticate. One of PLAIN, LOGIN, DIGEST-MD5, etc.
Show a help message about these command-line options.
Display the version of Cyrus IMAP the current ``cyradm`` command is a part of.
The server address to connect to.
--minssf N] [
--maxssf N] [
--mechanisms list] [
--service name] [
--tlskey keyfile] [
--cafile cacertfile] [
--capath cacertdir] user
Authenticate to server. You must already be connected to a server and Cyrus imapd will refuse to allow you to re-authenticate once you have authenticated once.
Change directory. A
pwd builtin is not provided, but the default command
action will run
pwd from a shell if invoked.
--partition partition] [
--specialuse specialuse] mailbox
--specialuse specialuse] mailbox partition
Create a mailbox on the default or a specified partition. Both old-style and getopt-style usages are accepted (combining them will produce an error). Optionally assign a special use to the mailbox.
New mailboxes inherit the ACL permissions of their parent mailbox, except for top-level mailboxes such as the user's INBOX. Mailboxes that are the user's INBOX are assigned all to the corresponding user.
- Example Usage
localhost> :command:`cm user.john` localhost> :command:`lm` user.john (\HasNoChildren) localhost> :command:`lam user.john` john lrswipkxtecda
Note that in the above example, the
unixhierarchysepsetting in imapd.conf is set to
0. When using the UNIX hierarchy separator, the
/(forward slash) character would be used as the hierarchy separator, and the example would look as follows:
- Example Usage with
localhost> :command:`cm user/john` localhost> :command:`lm` user/john (\HasNoChildren) localhost> :command:`lam user/john` john lrswipkxtecda
The above examples use the unqualified, shorthand user identifier john as the mailbox name.
With the use of virtual domains, controlled through the
virtdomainssetting in imapd.conf(5).
deleteaclmailbox mailbox id [...]
Remove ACLs from the specified mailbox.
Delete the specified mailbox.
Administrators do not have implicit delete rights on mailboxes. Use the
setaclmailbox command to grant the
x permission to your
principal if you need to delete a mailbox you do not own.
Disconnect from the current server. The prompt will revert to
This does not quit cyradm.
cyradm, optionally with a specific exit status; the exit status of the
last command will be used if one is not specified.
Show help for
command or all commands.
Display mailbox/server metadata
Display the mailbox/server annotations.
List ACLs on the specified mailbox.
--specialuse] [pattern [reference]]
List all, or all subscribed or special-use, mailboxes matching the specified
pattern. The pattern may have embedded wildcards
match anything or anything except the separator character, respectively.
Mailboxes returned will be relative to the specified reference if one is specified. This allows a mailbox list to be limited to a particular hierarchy.
In some cases when the
'%' wildcard is used to end a pattern, it may
match an entry which is not a mailbox but which contains other mailboxes.
In this case, the entry will be parenthesized to indicate that it is a
root for other mailboxes, as opposed to a mailbox itself.
List quotas on specified root. If the specified mailbox path does not have a quota assigned, an error will be raised; see listquotaroot for a way to find the quota root for a mailbox.
Show quota roots and quotas for mailbox
--private] mailbox attribute value
Set mailbox metadata, optionally set the private instead of the shared version of the metadata. A value of "none" will remove the attribute.
The currently supported attributes are:
Sets a comment or description associated with the mailbox.
Sets the number of days after which messages will be expired from the mailbox.
Sets an email address to which messages injected into the server via NNTP will be sent.
Sets a time (in RFC3501 format, for example "6-Jan-2011 11:45:32 +1100") which specifies a cutoff date such that POP3 fetching of the folder does not see messages whose internaldate is before or equal to the date.
Enables the use of a shared Seen flag on messages rather than a per-user Seen flag. The 's' right in the mailbox ACL still controls whether a user can set the shared Seen flag.
Indicates the name of the global sieve script that should be run when a message is delivered to the shared mailbox (not used for personal mailboxes).
Indicates that the mailbox should have a squat index created for it.
Reconstruct the specified mailbox, optionally recursing and reconstructing child mailboxes if the
-r flag is given.
For more information see reconstruct(8).
--partition partition] oldname newname
renamemailbox oldname newname [partition]
Rename the specified mailbox, optionally moving it to a different partition. Both old-style and getopt-style usages are accepted; combining them will produce an error.
server [--noauthenticate] [server]
With no arguments, show the current server. With an argument, connect to that
server. It will prompt for automatic login unless the
--noauthenticateoption is specified. (This may change; in particular, either automatic
authentication will be removed or all authenticate options will be added.)
When connected to a server, cyradm's prompt changes from
servername>, where servername is the fully qualified domain name
of the connected server.
setaclmailbox mailbox id rights [id rights ...]
Set ACLs on a mailbox. The ACL may be one of the special strings
any combinations of the ACL codes:
Lookup (mailbox is visible to LIST/LSUB, SUBSCRIBE mailbox)
Read (SELECT/EXAMINE the mailbox, perform STATUS)
Seen (set/clear SEEN flag via STORE, also set SEEN flag during APPEND/COPY/FETCH BODY[...])
Write flags other than SEEN and DELETED
Insert (APPEND, COPY destination)
Post (send mail to mailbox)
Create mailbox (CREATE new sub-mailboxes, parent for new mailbox in RENAME)
Delete mailbox (DELETE mailbox, old mailbox name in RENAME)
Delete messages (set/clear DELETED flag via STORE, also set DELETED flag during APPEND/COPY)
Perform EXPUNGE and expunge as part of CLOSE
setinfo attribute value
Set server metadata. A value of "none" will remove the attribute. The currently supported attributes are:
Sets a "message of the day". The message gets displayed as an ALERT upon connection.
Sets a comment or description associated with the server.
Sets the administrator email address for the server.
Sets a shutdown message. The message gets displayed as an ALERT and all users are disconnected from the server (subsequent logins are disallowed).
Sets the number of days after which messages will be expired from the server (unless overridden by a mailbox annotation).
Indicates that all mailboxes should have a squat indexes created for them (unless overridden by a mailbox annotation).
setmetadata [--private] mailbox [annotation] value
Set metadata on mailbox, where annotation is one of [comment|expire|news2mail|pop3showafter|sharedseen|sieve|specialuse| squat|/<explicit annotation>].
Note that value with a leading backslash must be escaped with an additional backslash. For example:
setmetadata --private Spam specialuse "\\Junk"
Note, too, that "private" annotations are private to the user currently authenticated as, not necessarily the owner of the mailbox. To set annotations for another user you must authorize as that user.
In addition to the use of optional flag --private, one may use a more explicit syntax, prefixing the annotation with '/shared/' or '/private/' as in this example:
setmetadata Spam /private/specialuse "\\Junk"
setquota root resource value [resource value ...]
Set a quota on the specified root, which may or may not be an actual
mailbox. The resources understood by Cyrus are
X-ANNOTATION-STORAGE. The storage
units are, as defined in RFC 2087, groups of 1024 octets (i.e.
Kilobytes). The value may be the special string
none which will
remove the quota.
Subscribe to the given mailbox.
Unsubscribe to the given mailbox.
Display the version info of the current server.
--partition partition] mailbox server
xfermailbox mailbox server [partition]
Transfer (relocate) the specified mailbox to a different server. Both old-style and getopt-style usages are accepted; combining them will produce an error.
GNU-style long options must be given in their entirety; Tcl-style options may be abbreviated.
Tcl-style options are provided as a compatibility feature. They will probably go away in the future.
Multiple commands can be given on a line, separated by
All commands set an exit status, which at present is not useful.
Unknown commands are passed to a subshell for execution.
The Tcl version of cyradm is used for scripting as well as interactively.
While this is possible to a limited extent by use of the
scripting would normally be done with
Cyrus::IMAP::Admin, which is far
more flexible than either interactive
cyradm or the Tcl scripting
mechanism for Cyrus.
cyradm understands /bin/sh-style redirection: any command can have
its standard or error output redirected, with all sh-style redirections
<>) supported. It does not currently understand pipes
Term::Readline::GNU modules are
available, cyradm will use it.
An alias facility is implemented internally, but no access is currently provided to it. This will change, if only to allow some of the predefined aliases to be removed if they conflict with useful shell commands.